| Customization: | Available |
|---|---|
| Application: | CNC Machine, Cut Equipment, Print Machine |
| Speed: | Variable Speed |
|
Still deciding? Get samples of US$ 36.76/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| CF2068M | ||||||||||||||||||
| Overview CF2068M is a 2-phase hybrid stepping motor driver based on DSP control. It is a new generation of digital stepping motor drive which combines advanced DSP control chip and 2-phase inverter drive module. The drive's voltage is between AC18V-80V, adapter current is below 7.2A and 57-110MM diameter of all kinds of 2-phase hybrid stepping motors. It uses a similar servo control circuit, which can make the motor running smoothly, almost no vibration and noise. When the motor is at high speed, its torque is much higher than other hybrid stepping motors. Positioning accuracy is up to 40,000 steps / turn. The product is widely used in engraving machine, medium-sized CNC machine tools, computer embroidery machine, packaging machinery and other high resolution, large and medium-sized CNC equipment. Key FeaturesHigh performance and low priceEquipped with 16 scales constant torque moment subdivision, the maximum resolution is 40,000 steps / turnThe maximum response frequency is up to 200KPPSWhen a stepping pulse stops more than 1.5S, the coil current will be automatically reduced to half of the set currentOptical isolation signal input / outputDrive current 2.0A / phase to 6.0A / phase 16 scales adjustableSingle power input, voltage range: AC18-80VThe phase memory function (Note: When the drive stops for more than 3 seconds, it will automatically memorize the motor phase then re-energizes. When the WF signal goes from low to high, the drive will automatically recover the motor phase.) |
||||||||||||||||||
Current Setting |
||||||||||||||||||
| The operating current of the drive is set by the SW1-3 terminals, which switch for normal working output current (See the table below). | ||||||||||||||||||
| Operating current Ir(A) | 2.0 | 2.57 | 3.14 | 3.71 | 4.28 | 4.86 | 5.43 | 6.0 | ||||||||||
| SW1 | ON | OFF | ON | OFF | ON | OFF | ON | OFF | ||||||||||
| SW2 | ON | ON | OFF | OFF | ON | ON | OFF | OFF | ||||||||||
| SW3 | ON | ON | ON | ON | OFF | OFF | OFF | OFF | ||||||||||
Subdivision Settings |
||||||||||||||||||
| The drive's subdivision is set by SW5-8 terminals. It has 16 scales. SW4 is function set. Subdivision reference table(pulse / revolution) | ||||||||||||||||||
| Subdivision | 400 | 800 | 1600 | 3200 | 6400 | 12800 | 25600 | 51200 | ||||||||||
| SW5 | ON | OFF | ON | OFF | ON | OFF | ON | OFF | ||||||||||
| SW6 | ON | ON | OFF | OFF | ON | ON | OFF | OFF | ||||||||||
| SW7 | ON | ON | ON | ON | OFF | OFF | OFF | OFF | ||||||||||
| SW8 | ON | ON | ON | ON | ON | ON | ON | ON | ||||||||||
| Subdivision | 1000 | 2000 | 4000 | 5000 | 8000 | 10000 | 20000 | 40000 | ||||||||||
| SW5 | ON | OFF | ON | OFF | ON | OFF | ON | OFF | ||||||||||
| SW6 | ON | ON | OFF | OFF | ON | ON | OFF | OFF | ||||||||||
| SW7 | ON | ON | ON | ON | OFF | OFF | OFF | OFF | ||||||||||
| SW8 | OFF | OFF | OFF | OFF | OFF | OFF | OFF | OFF | ||||||||||
| SW4 | OFF=Half Current | |||||||||||||||||
| ON=Full Current | ||||||||||||||||||
| Drive Wiring and Dimension Diagram |
||||||||||||||||||
|
||||||||||||||||||
){kind=link}