3 Phase 86mm Size Series Length 80mm NEMA 34 Stepper Motor/ Stepper Motor Driver

• Customization: Available
• Application: Printing Equipment
• Speed: Low Speed
• Model NO.: 34HT8040/86STH3P80-4003+CF30522M
• Excitation Mode: HB-Hybrid
• Function: Control
• Number of Poles: 12
• Operate Mode: Three-Phase Six-Step
• Type: Magnetic-Electric
• Certification: ISO9001
• Brand: Thank
• The Name of The Adaptive Drive: Stepper Motor Driver
• The Model of The Adaptive Drive: CF30522m
• Application Field: Servo Control System
• The Applied Voltage: 220VAC, 48VDC, 36VDC
• Transport Package: Carton or Wooden Box with Foam Inside
• Specification: 86mm*86mm*L80mm
• Trademark: THANK
• Origin: China
• HS Code: 8501310000
• Production Capacity: 200000 PCS/Year
• Package Size: 40.00cm * 30.00cm * 30.00cm
• Package Gross Weight: 6.000kg

Product Description

HYBRID STEPPING MOTOR  34HT  SERIES

General  Specifications:
Step Angle ----------------------------------------------------------------------------------------------------------------1.2° (full step)
Step Angle Accuracy --------------------------------------------------------------------------------------±5%(full step, no load)
Resistance Accuracy --------------------------------------------------------------------------------------------------------------±10%
Inductance Accuracy --------------------------------------------------------------------------------------------------------------±20%
Temperature Rise ----------------------------------------------------------------------80ºC Max(rated current, 2 phases on)
Ambient Temperature Range ----------------------------------------------------------------------------------------  -20ºC∽+50ºC
Insulation Resistance ---------------------------------------------------------------------------------------  100MΩ Min. 500VDC
Dielectric Strength --------------------------------------------------------------------------------- 500VAC 50Hz 1mA 1 Minute
Insulation Class ------------------------------------------------------------------------------------------------------------------ B class


Electrical  Specifications:

Model	L Motor Length (mm)	Holding Torque (N.cm) Min.	Rated Current (A)	Phase Resistance (Ω)	Phase Inductance (mH)	Rotor Inertia (kg.cm²)	Lead Wire	Detent Torque (N.cm) Max.	Motor Weight (kg)
34HT7040	70	250	4.0	0.7	9.3	1.1	3	12	2.1
34HT8040	80	300	4.0	0.9	12	1.23	3	15	2.3
34HT10040	100	500	4.0	1.3	16.2	2.7	3	20	3.3
34HT11840	118	600	4.0	1.60	16.5	3.3	3	30	3.7
34HT13040	130	750	4.0	1.95	17	4.0	3	35	4.0
34HT15040	150	900	4.0	2.35	19	5.0	3	45	5.5

*Shown in the table is the representative product. It can be customized according to the requirements of users.

 

Shaft types:

       3-Phase Digital Stepping Drive
                        CF30522M
Overview
CF30522M is a 3-phase hybrid stepping motor drive based on DSP control. It is a new generation of digital stepping motor drive which combines advanced DSP control chip and 3-phase inverter drive module. It uses a similar servo control circuit, which can make the motor running smoothly, almost no vibration and noise. When the motor is at high speed, its torque is much higher than 2-phase and 5-phase hybrid stepping motors. The product is widely used in engraving machine, medium-sized CNC machine tools, computer embroidery machine, packaging machinery and other high resolution, large and medium-sized CNC equipment.
Key Features

1. 110 to 220VAC supply voltage
2. Suitable for 3-phase, 3 and 6 leads hybrid stepping motors, with NEMA size23 to 42
3. Output current selectable from 1.2~5.0A
4. Current reduction by 50% automatically, when motor standstill mode is enabled
5. Optical isolation signal input / output
6. Positioning accuracy is up to 12,000 steps / turn
7. Over Voltage, Coil to Coil and Coil to ground short circuit protection
8. Pulse Input Frequency 0~200KHz
9. The phase memory function (Note: When the drive stops for more than 3 seconds, it will automatically memorize the motor phase then re-energizes. When the WF signal goes from low to high, the drive will automatically recover the motor phase).

 

                                                                                                                       

Application: 

 

Packing:
Hard cardboard or wooden box with foam inside.


Shipping:
Normally the delivery time is within 10 days according to customer's choice or ship by the best express company to the destination.

 

Delivery:
1.with over 17 years of manufacturing experience, any type of customizing is available.
2.with perfect service system, we can provide you with first class pre and after sale service.
3.we have enough storage of each type of products, with first class packaging and shipping, make sure  accurate delivery.
4.professional sales consultants give you all answers about our proucts.


Certificate:

 

FAQ: 
Question1: What is your service time:
Answer: 24 hours online service. Email will be replied within 12 hours.

Question2: What about your products' warranty?
 Answer: 1 year. For sea orders, the warranty is 15 months.

Question3: Do you have any certificate?
Answer: Yes we have. Our factory passed ISO9001 and SGS verified. All motors have been approved by CE.

Question4: Do you offer ODM and OEM Service?
Answer: Yes. ODM products according to customized design and specification as well as OEM products.

Question5: What is the delivery time?
Answer: For samples, 10-30 days according to the differnet produced difficulty. For bulk, normally 20-30 days. For customized order, the delivery can be negotiated.