NEMA34 86mm High Torque 2 Phase Step/Stepping/Stepper Motor and Driver 60-110VAC

• Customization: Available
• Application: Printing Equipment
• Speed: Variable Speed
• Model NO.: 34HS/86STH+CF20611M
• Number of Stator: Two-Phase
• Excitation Mode: HB-Hybrid
• Function: Control
• Number of Poles: 100
• Type: Magnetic-Electric
• Certification: ISO9001
• Brand: Thank, Changfeng
• Adaptive Drive Motor: Stepper Motor Driver
• Adaptive Drive Model: CF20522m ,CF20611m, CF2068, 860
• Application Field: Servo Control System
• The Applied Voltage: 220VAC, 110VAC, 48VDC,36VDC,24VDC
• Transport Package: Carton or Wooden Box with Foam Inside
• Specification: 86mm*86mm*L130-150mm
• Trademark: THANK
• Origin: China
• HS Code: 8501310000
• Production Capacity: 200000 PCS/Year

Product Description

HYBRID STEPPING MOTOR  34HS  SERIES

General  Specifications:
Step Angle ----------------------------------------------------------------------------------------------------------------1.8° (full step)
Step Angle Accuracy --------------------------------------------------------------------------------------±5%(full step, no load)
Resistance Accuracy --------------------------------------------------------------------------------------------------------------±10%
Inductance Accuracy --------------------------------------------------------------------------------------------------------------±20%
Temperature Rise ----------------------------------------------------------------------80ºC Max(rated current, 2 phases on)
Ambient Temperature Range ----------------------------------------------------------------------------------------  -20ºC∽+50ºC
Insulation Resistance ---------------------------------------------------------------------------------------  100MΩ Min. 500VDC
Dielectric Strength --------------------------------------------------------------------------------- 500VAC 50Hz 1mA 1 Minute
Insulation Class ------------------------------------------------------------------------------------------------------------------ B class

                      Silver Front Endbell                                              Black Front Endbell                                              Silver Front Endbell


Electrical  Specifications:

Model	L Motor Length (mm)	Holding Torque (N.cm) Min.	Rated Current (A)	Phase Resistance (Ω)	Phase Inductance (mH)	Rotor Inertia (g.cm²)	Lead Wire	Detent Torque (N.cm) Max.	Motor Weight (g)
34HS13060	130	1000	6	0.6	5.8	4.0	4	35	4.0
34HS15060	150	1200	6	0.7	6.8	5.0	4	45	5.5

*Shown in the table is the representative product. It can be customized according to the requirements of users.
 

Shaft:

                                                                                                                   
End:

2-Phase Digital Stepping Motor Driver
CF20611M

Overview:
CF20611M is a 2-phase hybrid stepping motor driver based on DSP control. It is a new generation of digital stepping motor drive which combines advanced DSP control chip and 2-phase inverter drive module. The drive's voltage is between AC60-110V, adapter current is below 6.0A and 86-110MM diameter of all kinds of 2-phase hybrid stepping motors. It uses a similar servo control circuit, which can make the motor running smoothly, almost no vibration and noise. When the motor is at high speed, its torque is much higher than other hybrid stepping motors. Positioning accuracy is up to 20,000 steps / turn. The product is widely used in engraving machine, medium-sized CNC machine tools, computer embroidery machine, packaging machinery and other high resolution, large and medium-sized CNC equipment.

Key Features:

• High performance and low price
• Equipped with 16 scales constant torque moment subdivision, the maximum resolution is 20,000 steps / turn
• The maximum response frequency is up to 200KPPS
• When a stepping pulse stops more than 1.5S, the coil current will be automatically reduced to half of the set current
• Optical isolation signal input / output
• Drive current 1.2A / phase to 6.0A / phase 16 scales adjustable
• Single power input, voltage range: AC60-110V
• The phase memory function (Note: When the drive stops for more than 3 seconds, it will automatically memorize the motor phase then re-energizes. When the WF signal goes from low to high, the drive will automatically recover the motor phase.)

Current Setting:
The operating current of the drive is set by theDP1- D1-D4 terminals, which switch for normal working output current (See the table below).

Operating current Ir(A)	1.2	1.5	2.0	2.3	2.5	3.0	3.2	3.6
DP1-D1	OFF	OFF	OFF	OFF	OFF	OFF	OFF	OFF
DP1-D2	OFF	OFF	OFF	OFF	ON	ON	ON	ON
DP1-D3	OFF	OFF	ON	ON	OFF	OFF	ON	ON
DP1-D4	OFF	ON	OFF	ON	OFF	ON	OFF	ON
Operating current Ir(A)	4.0	4.5	5.0	5.3	5.8	6.0	6.0	6.0
DP1-D1	ON	ON	ON	ON	ON	ON	ON	ON
DP1-D2	OFF	OFF	OFF	OFF	ON	ON	ON	ON
DP1-D3	OFF	OFF	ON	ON	OFF	OFF	ON	ON
DP1-D4	OFF	ON	OFF	ON	OFF	ON	OFF	ON

Subdivision Settings:
The drive's subdivision is set by DP2-D1-D4 terminals. It has 16 scales. D5,6 is function set. Subdivision reference table(pulse / revolution)

Subdivision	200	400	800	1000	1600	2000	3200	4000
DP2-D1	ON	ON	ON	ON	ON	ON	ON	ON
DP2-D2	ON	ON	ON	ON	OFF	OFF	OFF	OFF
DP2-D3	ON	ON	OFF	OFF	ON	ON	OFF	OFF
DP2-D4	ON	OFF	ON	OFF	ON	OFF	ON	OFF
Subdivision	5000	6400	8000	10000	12800	20000	600	500
DP2-D1	OFF	OFF	OFF	OFF	OFF	OFF	OFF	OFF
DP2-D2	ON	ON	ON	ON	OFF	OFF	OFF	OFF
DP2-D3	ON	ON	OFF	OFF	ON	ON	OFF	OFF
DP2-D4	ON	OFF	ON	OFF	ON	OFF	ON	OFF
DP2-D5	ON	Double pulse mode: cw/ccw
	OFF	PU+DR mode: PU is pulse signal, DR is direction signal
DP2-D6	ON	The motor is operated at the speed of 30r/min.
	OFF	Accept pulse input

Drive Wiring and Dimension Diagram:      

1. Input voltage cannot exceed AC 110V.
2. Input control signal level is 5V. When higher than 5V, it needs to connect to a current limiting resistor.
3. Input pulse signal's falling edge is valid.
4. The fault indicator Fault light will be on when the drive's temperature exceeds 80ºC and stops working. Until the drive's temperature drops to 50ºC, it needs to re-power to resume work. Please install a radiator to protect excessing heat.
5. When Fault light for over-current (load short-circuit) fault indicator is on, please check the motor wiring and other short-circuit faults, then Re-power the motor for recovery after cleaning faults.
6. When Fault light for no-motor fault indicator is on, please check the motor wiring, then re-power for recovery after cleaning faults.

Field 


Packing:
Hard cardboard or wooden box with foam inside.


Shipping:
Normally the delivery time is within 10 days according to customer's choice or ship by the best express company to the destination.



Delivery:
1.with over 17 years of manufacturing experience, any type of customizing is available.
2.with perfect service system, we can provide you with first class pre and after sale service.
3.we have enough storage of each type of products, with first class packaging and shipping, make sure  accurate delivery.
4.professional sales consultants give you all answers about our proucts.


Certificate:

FAQ: 
Question1: What is your service time:
Answer: 24 hours online service. Email will be replied within 12 hours.

Question2: What about your products' warranty?
 Answer: 1 year. For sea orders, the warranty is 15 months.

Question3: Do you have any certificate?
Answer: Yes we have. Our factory passed ISO9001 and SGS verified. All motors have been approved by CE.

Question4: Do you offer ODM and OEM Service?
Answer: Yes. ODM products according to customized design and specification as well as OEM products.

Question5: What is the delivery time?
Answer: For samples, 10-30 days according to the differnet produced difficulty. For bulk, normally 20-30 days. For customized order, the delivery can be negotiated.