Basic Info.
Model NO.
34HT11840/86STH3P118-4003+CF30522M
Application
Printing Equipment
Number of Stator
Three-Phase
Excitation Mode
HB-Hybrid
Operate Mode
Three-Phase Six-Step
The Name of The Adaptive Drive
Stepper Motor Driver
The Model of The Adaptive Drive
CF30522m
Application Field
Servo Control System
The Applied Voltage
220VAC, 48VDC, 36VDC
Transport Package
Carton or Wooden Box with Foam Inside
Specification
86mm*86mm*L118mm
Product Description
HYBRID STEPPING MOTOR 34HT SERIES
General Specifications: Step Angle ----------------------------------------------------------------------------------------------------------------1.2° (full step)
Step Angle Accuracy --------------------------------------------------------------------------------------±5%(full step, no load)
Resistance Accuracy --------------------------------------------------------------------------------------------------------------±10%
Inductance Accuracy --------------------------------------------------------------------------------------------------------------±20%
Temperature Rise ----------------------------------------------------------------------80ºC Max(rated current, 2 phases on)
Ambient Temperature Range ---------------------------------------------------------------------------------------- -20ºC∽+50ºC
Insulation Resistance --------------------------------------------------------------------------------------- 100MΩ Min. 500VDC
Dielectric Strength --------------------------------------------------------------------------------- 500VAC 50Hz 1mA 1 Minute
Insulation Class ------------------------------------------------------------------------------------------------------------------ B classElectrical Specifications:Model | L Motor Length (mm) | Holding Torque (N.cm) Min. | Rated Current (A) | Phase Resistance (Ω) | Phase Inductance (mH) | Rotor Inertia (kg.cm²) | Lead Wire | Detent Torque (N.cm) Max. | Motor Weight (kg) |
34HT7040 | 70 | 250 | 4.0 | 0.7 | 9.3 | 1.1 | 3 | 12 | 2.1 |
34HT8040 | 80 | 300 | 4.0 | 0.9 | 12 | 1.23 | 3 | 15 | 2.3 |
34HT10040 | 100 | 500 | 4.0 | 1.3 | 16.2 | 2.7 | 3 | 20 | 3.3 |
34HT11840 | 118 | 600 | 4.0 | 1.60 | 16.5 | 3.3 | 3 | 30 | 3.7 |
34HT13040 | 130 | 750 | 4.0 | 1.95 | 17 | 4.0 | 3 | 35 | 4.0 |
34HT15040 | 150 | 900 | 4.0 | 2.35 | 19 | 5.0 | 3 | 45 | 5.5 |
*Shown in the table is the representative product. It can be customized according to the requirements of users. Shaft types: 3-Phase Digital Stepping Drive
CF30522M
Overview
CF30522M is a 3-phase hybrid stepping motor drive based on DSP control. It is a new generation of digital stepping motor drive which combines advanced DSP control chip and 3-phase inverter drive module. It uses a similar servo control circuit, which can make the motor running smoothly, almost no vibration and noise. When the motor is at high speed, its torque is much higher than 2-phase and 5-phase hybrid stepping motors. The product is widely used in engraving machine, medium-sized CNC machine tools, computer embroidery machine, packaging machinery and other high resolution, large and medium-sized CNC equipment.
Key Features
- 110 to 220VAC supply voltage
- Suitable for 3-phase, 3 and 6 leads hybrid stepping motors, with NEMA size23 to 42
- Output current selectable from 1.2~5.0A
- Current reduction by 50% automatically, when motor standstill mode is enabled
- Optical isolation signal input / output
- Positioning accuracy is up to 12,000 steps / turn
- Over Voltage, Coil to Coil and Coil to ground short circuit protection
- Pulse Input Frequency 0~200KHz
- The phase memory function (Note: When the drive stops for more than 3 seconds, it will automatically memorize the motor phase then re-energizes. When the WF signal goes from low to high, the drive will automatically recover the motor phase).
Application:
Packing:
Hard cardboard or wooden box with foam inside.
Shipping:
Normally the delivery time is within 10 days according to customer's choice or ship by the best express company to the destination.
Delivery:
1.with over 17 years of manufacturing experience, any type of customizing is available.
2.with perfect service system, we can provide you with first class pre and after sale service.
3.we have enough storage of each type of products, with first class packaging and shipping, make sure accurate delivery.
4.professional sales consultants give you all answers about our proucts.
Certificate:
FAQ:
Question1: What is your service time:
Answer: 24 hours online service. Email will be replied within 12 hours.
Question2: What about your products' warranty?
Answer: 1 year. For sea orders, the warranty is 15 months.
Question3: Do you have any certificate?
Answer: Yes we have. Our factory passed ISO9001 and SGS verified. All motors have been approved by CE.
Question4: Do you offer ODM and OEM Service?
Answer: Yes. ODM products according to customized design and specification as well as OEM products.
Question5: What is the delivery time?
Answer: For samples, 10-30 days according to the differnet produced difficulty. For bulk, normally 20-30 days. For customized order, the delivery can be negotiated.
Address:
No. 5, Cailing Science & Technology Park, 38 Fenghuang Road, Tianning District, Changzhou City, Changzhou, Jiangsu, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Auto, Motorcycle Parts & Accessories, Electrical & Electronics, Industrial Equipment & Components, Manufacturing & Processing Machinery, Packaging & Printing
Management System Certification:
ISO 9001
Company Introduction:
CF Electric Motor Co., Ltd (Changzhou Changfeng Motor Co., Ltd) was established in 2003, prior to which the organization was named Changzhou THANK Institute of Electrical and Mechanical Technology. We develop and manufacture or own products, including stepper motors, servo motors, hybrid stepper-servo motors, brushless DC motors, motor drivers and etc.
The mail application of our products is CNC machine tools, wire-stripping machine, packaging machinery, textile machinery, engraving machine, marking machine, cutting machine, laser photocomposing machine, plotting instrument, medical equipment, automatic assembly equipment as well as many other automatic- control machinery and equipment applications. We also develop and customize product to account for any special customer needs and requirements,
Our company is ISO9001-certified, and all products are RoHS compliant. In order to deliver our excellent products to even more customers, we need collaboration with overseas agents. We are looking forward to working with you.